Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Highland Creek
If water is getting into your chimney, or the cap on top has rusted through, you’re in the right place. We handle cap installation, replacement, crown repair and crown coating for the large homes and multi-flue chases around Highland Creek, and our technicians have up to 13 years of experience with exactly this kind of builder-grade system. Highland Creek is a master-planned golf community built mostly between the 1990s and early 2000s, which means most of the fireplaces here are factory-built prefabs with short exterior flues, not the tall masonry stacks you’d find in older Charlotte neighborhoods. That changes what fails first and what we recommend. Call (855) 337-1327. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Give us a call at (855) 337-1327 and we’ll set up a free estimate.
Why Highland Creek Homeowners Call Chimney Sweep Highland Creek for Chimney Cap & Crown
We’re a full-service chimney specialist, which means the cap and crown on top of your house aren’t the only part of your system we understand. On the larger Highland Creek properties around the golf course, the cap is where the water usually gets in first, and the crown is where it starts to spall. When we’re up there for a cap call, we’re also looking at the chase cover, the spark arrestor, the damper and the flue, so nothing gets missed and nothing gets sold to you twice.
Our technicians have up to 13 years of experience, and we work with six professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. We don’t stock parts on a truck or run a fleet. What we do is match the right material to your specific chimney, whether that’s a Famco multi-flue cap for a two-fireplace chase or HeatShield resurfacing for a firebox that’s starting to break down.
Here’s what we hear a lot from Highland Creek owners: the house was built in the late 1990s or early 2000s, and the chimney has never had anything done to it. Not a sweep, not an inspection, not a cap check. Those calls are usually the ones where we find a hairline crown crack or a rusted spark arrestor that’s been letting water in for a few seasons. Our job is to show you what we found, show you the photos from the camera inspection, and tell you straight whether it can wait or needs attention before burn season.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Highland Creek
We treat the cap, crown, chase cover and flue as one system, because on the short exterior flues common to Highland Creek they fail together. Here’s what we do most often on these homes.
Cap Installation in Highland Creek
If you’ve just moved into a Highland Creek home and nobody has ever capped the flue, this is the first call we’d make. A proper cap keeps birds, squirrels and rain out of the flue, and on the golf-course lots near the fairways the wildlife pressure is real. We fit stainless mesh and the right size cap for your flue, with a photo of the finished job so you can see it yourself.

Cap Replacement in Highland Creek
Most cap replacement calls we get in Highland Creek aren’t about a missing cap. They’re about a rusted-out one. Wind-driven rain coming sideways into the mesh rusts the spark arrestor from the inside out, and by the time you notice, the cap is doing more harm than good. We replace the cap and check the damper and chase cover while we’re up there, because the water usually got further than the cap.

Crown Repair in Highland Creek
The crown is the concrete or mortar top of the chimney that sheds water away from the flue. On a builder-grade Highland Creek chimney, a hairline crack in the crown is common, and it’s the entry point for water that spalls the masonry and tracks into the smoke chamber. Crown repair seals those cracks and re-slopes the top so water runs off instead of soaking in. It’s a real fix, not a coat of paint over the crack.

Crown Coating in Highland Creek
Crown coating is the step most cap-only companies skip. Once the crown is repaired, a flexible coating protects it against the freeze-thaw cycles that a Piedmont NC winter throws at it, when a mild spell followed by an ice event works cracks open again. On these short-exterior-chase homes, the crown takes more weather than a tall stack would, so the coating earns its keep.
We also do multi-flue caps and custom caps as part of our Chimney Cap & Crown work, so whether you have one flue or a chase covering a wood fireplace and a gas insert, there’s a cap built for it.
Trusted Brands We Service in Highland Creek
We work with Famco caps and Copperfield products for the cap and crown side of the job, and HeatShield ceramic repair systems when a firebox or flue needs resurfacing rather than full replacement. DuraFlex liner systems are in the toolkit for relining work when the inspection shows the existing flue can’t safely carry the appliance any longer. We don’t stock these parts ourselves; what we do is specify the right one for your chimney, order it, and get it fitted. That means the right material the first time instead of a one-size cap that doesn’t fit the chase, and on a Highland Creek two-flue setup that difference matters.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Highland Creek Homes
- Rusted spark arrestors from wind-driven rain. Highland Creek’s Cape-style chase covers and short exterior flues let sideways rain past the cap mesh, and the arrestor rusts from the inside. It’s a failure mode we rarely see in older masonry neighborhoods where the chimney is tall enough to shed water before it reaches the cap.
- Hairline crown cracks on builder-grade chimneys. The prefab fireboxes in these 1990s and 2000s homes run short exterior chases, and the crown at the top takes the weather that a taller stack would take further up. Small cracks spall, and water tracks down into the smoke chamber.
- Uncapped flues near the fairway hardwoods. The hardwood canopy around the golf course means birds and squirrels nest in open flues routinely. Their nests block draft and can hide creosote buildup until a Level 2 inspection with a camera reveals it.
- Water in the chase after a dormant season. Piedmont NC winters are mild and short, so fireplaces here sit unused for months. That’s exactly when the damage happens, and it’s the first cold snap that brings the call when the damper sticks or the firebox smokes.
On a typical Highland Creek two-story home, the factory-built firebox sits dormant for months. When the first cold snap arrives, the owner finds the damper hard to open or the firebox smoky. A qualified local pro often finds a rusted or missing cap and a hairline crown crack letting water into the chase. The fix is usually a new multi-flue cap and a crown coating to seal the top before the next burn season.
Pricing for Chimney Cap & Crown in Highland Creek, NC
Here’s what this work typically runs in the Highland Creek market. A single-flue cap installation usually falls between $180 and $450, depending on flue size and whether it’s stainless. A multi-flue cap for a two-fireplace chase runs $400 to $900. Crown repair, sealing hairline cracks and re-sloping the top, runs $350 to $800. A full crown rebuild, where the old crown is removed and poured new, runs $800 to $1,800. Crown coating after repair adds $200 to $500. These are estimates. The written estimate sets the final price, and we agree it before any work is booked. Nothing gets recommended that the camera inspection doesn’t show. If the photos show a crown that can safely wait a season, we’ll tell you. Call (855) 337-1327 for a free estimate.
We Also Serve Cities Near Highland Creek
We also work in Derita, NoDa, University City and Plaza Midwood, so if you’re near the edge of Highland Creek and not sure if you’re in our area, call and we’ll tell you. The same cap, crown and multi-flue services are available across those neighborhoods.
Serving Highland Creek, NC – Our Local Coverage Area
We serve Highland Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Highland Creek
Yes, each flue needs its own cap coverage, and that’s exactly what a multi-flue cap is for. It covers both terminations on a single chase in one unit, so you don’t get two loose caps sitting next to each other where wind can lift or shift them. On the short exterior chases common in Highland Creek, a properly fitted multi-flue cap is also what keeps wind-driven rain out of the mesh on both flues. Call (855) 337-1327 to book an estimate.
No. A cracked crown is a water entry point, not a cosmetic issue. Once water gets into the crown it spalls the concrete, and on these builder-grade chimneys the water tracks down into the smoke chamber behind the firebox. Crown repair usually stops it early. A full rebuild is only needed if the crown has already broken up. We’ll show you the photos and tell you which one your chimney needs. Call (855) 337-1327 for a free estimate.
Once a year for the whole system, both appliances included. A wood-burning fireplace builds creosote and needs an annual Level 1 inspection even if it’s only used in the cold snaps. A gas insert has its own venting and its own wear points. On these large Highland Creek homes with two appliances on one chase, the annual inspection is what catches a rusted cap or a hairline crown crack before it becomes a repair. Call (855) 337-1327 and we’ll book the inspection.
Because the flue is open and the hardwood canopy around the fairways gives them cover. Birds and squirrels will nest in an uncapped flue every spring. The nest blocks draft, and it can hide creosote buildup until a Level 2 camera inspection finds it. A stainless mesh cap solves the problem permanently, and it’s one of the simpler fixes we install in Highland Creek. Call (855) 337-1327 for a free quote.
Coating seals and protects a crown that’s still structurally sound, but it doesn’t fix spalling that’s already broken the crown apart. The order is repair first, coating second. If the crown is spalling badly, a full rebuild is the right call, and the coating protects the new crown after that. We’ll tell you which one your chimney needs based on the photos, not on guesswork. Call (855) 337-1327 for a free estimate.
Written by the team at Chimney Sweep Highland Creek.