Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across NoDa
If you own one of the older houses off North Davidson or the side streets near 36th, your chimney cap and crown are probably the oldest working parts of the whole system. We handle chimney cap and crown work across NoDa, from single-flue cap swaps to cast-in-place crown rebuilds on 1930s mill-house stacks. NoDa’s mix of century-old brick bungalows and newer infill townhomes near the light rail means the right answer is different on every block. We plan our routes carefully around that, so getting a technician out to your place is straightforward. Call (855) 337-1327 and we’ll get a real look at what’s up there.
Why NoDa Homeowners Call Chimney Sweep Highland Creek for Chimney Cap & Crown
NoDa homeowners call us because the cap-and-crown work here isn’t cosmetic – it’s structural maintenance on near-century-old masonry. A brick crown that’s already cracked lets Piedmont humidity into an unlined or clay-tile flue all summer, and the damage shows up months later as spalling brick and rusted screens. We start by showing you what we see, on camera, before anything gets priced.
Our technicians have up to 13 years of experience, and we work with the material brands professionals actually use: HeatShield for crown and firebox resurfacing, Olympia Chimney and Famco for caps and multi-flue setups, and DuraFlex when a reline comes into play. We bring the right material for the specific repair rather than forcing one product onto every house. That matters more in NoDa than almost anywhere in Charlotte, because no two stacks on these blocks were built the same way.
Response time to NoDa is predictable. We book jobs by route, so a request from the blocks around North Davidson and 36th gets scheduled into a normal run through this part of the city. Call (855) 337-1327. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in NoDa
Here’s a direct answer before we get into the details: cap and crown work in NoDa usually starts with an inspection, because on mill-village brick the cap you can see and the crown underneath it are rarely the whole story. Every job below begins with a camera look and a clear walkthrough of what we found.
Cap Installation
On newer infill townhomes near the light rail, the existing factory-built metal fireplace often has a cap sized for the wrong flue count – or none at all. We install correctly sized caps from Olympia Chimney and Famco so the flue is protected without restricting draft. On the older bungalows, a proper single-flue cap with a tight spark screen keeps birds and rain out of a clay-tile flue that was never meant to sit open all summer.

Cap Replacement
A NoDa cap that rusts out every few years is usually telling you something about the flue below it, not just the steel above. We replace failed caps with materials matched to the flue – stainless where the moisture load is heavy under the tree canopy, galvanized where the budget calls for it. If a flipper’s contractor put on a cap sized for one flue when you have two, we’ll show you the mismatch before quoting a fix.

Crown Repair
This is the core of our work in NoDa. Most 1920s to 1940s mill-house stacks have original single-wythe brick crowns that have already cracked and spalled on the shaded north side. We repair crowns with cast-in-place masonry or HeatShield ceramic systems, which is a professional-grade alternative to a full rebuild when the crown is failing but the stack is sound. You’ll see the cracked crown wash and the spalling brick on camera before we recommend anything.

Crown Coating
Where a crown is weathering but hasn’t failed, a proper crown coating buys years – often decades – of service. On NoDa houses with dense tree cover, the shaded brick stays damp longer, so a breathable, flexible coating applied over a cleaned and prepared surface is what holds up. Coating a crown that’s already structurally compromised is a waste of money, and we’ll tell you plainly when that’s the case.
Trusted Brands We Service in NoDa
We install and repair cap and crown systems using materials from HeatShield, Olympia Chimney, Famco, Copperfield, Gelco, and DuraFlex. Each one is chosen for a specific job: HeatShield for ceramic crown and firebox resurfacing, Olympia and Famco for caps and multi-flue assemblies, Copperfield for custom cap fabrication on odd-sized 1930s stacks, and DuraFlex when a reline follows a failed crown. We don’t claim to stock parts in NoDa – what we do is source the right product for your specific flue and have it on hand before the job starts. That keeps turnaround realistic and avoids mid-job substitutions.
Common Chimney Cap & Crown Problems We See in NoDa Homes
NoDa’s chimneys are attached to 1920s-1940s mill-village houses and bungalows built for Highland Park Mill No. 3 textile workers. Most jobs here are on near-century-old masonry that has already been repointed, lined, or capped once – and the neighborhood’s booming teardown-and-renovate cycle means half our work is inspecting chimneys a flipper’s contractor touched and half is talking owners out of venting a new gas insert into an old flue built for coal and retrofitted for wood.
- Original single-wythe crowns cracking on the shaded side. Decades of Piedmont humidity plus NoDa’s heavy tree canopy keep north-facing brick damp year-round, so crown failure here shows up as spalling brick and rusted cap screens rather than sun-baked wear. On a typical mill-house chimney, the original mortar crown has hairline cracks that widen into real water intrusion within a few seasons.
- Flipper-installed caps sized for the wrong flue count. A cap built for one flue on a two-flue stack leaves gaps that let birds, squirrels, and rain into a clay-tile flue. We see this on renovated bungalows where the interior got a full gut but the chimney got a quick cap swap.
- Rusted or missing spark screens packed with leaf litter. Dense canopy means twigs and leaves, and a clogged screen chokes draft and glazes first-degree creosote into a harder second-degree layer over a mild winter. By the time it’s noticed, it’s often a sweep plus a screen replacement instead of just a sweep.
- New gas inserts vented into flues never designed for them. A flue built for coal and later used for wood doesn’t necessarily handle the moisture and temperature profile of a gas appliance. This is where liner recommendations need to come with camera evidence, not a sales pitch.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in NoDa, NC
Typical pricing in NoDa runs $250-$550 for a standard single-flue cap installation, $450-$850 for a multi-flue or custom-fabricated cap on an odd-sized 1930s stack, $600-$1,400 for crown repair using HeatShield or a cast-in-place masonry repair, and $350-$700 for crown coating on a crown that hasn’t failed. A full crown rebuild on a badly deteriorated mill-house crown can run higher. The written estimate sets the final price, and nothing is recommended without camera evidence you can see for yourself – if work can safely wait, we’ll tell you.
We Also Serve Cities Near NoDa
We serve homeowners in NoDa and the surrounding neighborhoods, including Plaza Midwood, Elizabeth, Eastover, and Myers Park. Plaza Midwood’s bungalows share much of the same mill-era brick stock, which means similar crown and cap failure patterns; Elizabeth and Myers Park have their own older-stock considerations. If you’re just outside the neighborhood, NoDa is still our scheduling anchor for this part of the city.
Serving NoDa, NC – Our Local Coverage Area
We serve NoDa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in NoDa
Most original crowns can be coated rather than rebuilt, as long as the brick underneath is sound. We run a camera inspection first and show you the crown wash, the spalling pattern, and the north-facing mortar joints on video. If the crown is cracking but the brick is holding, a HeatShield or flexible coating is the right call. If the crown has already failed structurally, coating it is money wasted. Call (855) 337-1327 for an exact quote – estimates are free.
Your cap is rusting because the shaded side of your stack stays damp longer than the rest of the chimney. NoDa’s tree canopy keeps north-facing brick wet through humid summers, and moisture sitting against a galvanized cap accelerates corrosion. A stainless cap sized correctly for your flue handles that load far better than a replacement galvanized one. Call (855) 337-1327 and we’ll show you what’s driving the failure before quoting the fix.
Sometimes it’s legitimate and sometimes it’s a guess, and the difference is camera evidence. A flue built for coal and retrofitted for wood doesn’t automatically handle the moisture profile of a gas insert, but whether a liner is actually needed depends on what’s inside your specific flue. We run a Level 2 inspection with a camera, show you the footage, and only recommend a liner or HeatShield resurfacing when the evidence supports it. Call (855) 337-1327 to book an inspection.
Once a year, even if you burn lightly. NoDa’s mild winters mean only a handful of real burning days, which produces the classic failure mode here: a chimney that sits unused for months, draws humid air into an unlined brick flue, then gets a few heavy December burns that crack mortar and glaze creosote. Skipping inspections in a climate like this hides moisture damage until it’s expensive. Call (855) 337-1327 – estimates are free.
Yes, and it’s a common request in NoDa where a flue was added during a renovation. A multi-flue cap from Olympia Chimney or a custom-fabricated Copperfield cap can bridge two flues of different sizes and ages as long as the crown underneath is sound enough to anchor it. We’ll show you what’s supporting the cap before we quote. Call (855) 337-1327 to schedule an inspection.
Get a Free Estimate for Cap & Crown Work in NoDa
Whether your crown is original to a 1930s mill-house stack or a flipper’s contractor left you a cap that doesn’t fit, we start with the camera and show you what’s actually there. Our chimney cap & crown team handles everything from a single-flue cap swap to a full crown rebuild on NoDa’s older masonry, and every recommendation comes with video evidence before any work is priced. Call (855) 337-1327 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Highland Creek.