Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Highland Creek Homeowners
Most chimney problems don’t announce themselves. Creosote builds in layers you can’t see from the hearth, a flue tile cracks behind the damper, and the first real sign is smoke backing into the room or a draft that won’t draw. A proper inspection tells you what’s actually happening inside your chimney system before a small issue becomes a liner job. Our technicians have up to 13 years of experience reading exactly those conditions, and we offer inspections as a standalone service rather than something bundled onto a sweep you may not need. If you want an honest assessment in Highland Creek, call (855) 337-1327. We answer 24/7. Fast dispatch from 7am to 7pm.
What Our Chimney Inspection Service Includes
An inspection is the foundation of every other chimney decision. Here’s what each level covers and when it’s the right call for your home.
Level 1 Inspection
A Level 1 inspection is the basic visual check of readily accessible parts of your chimney and venting system. It’s what you want when your fireplace and chimney are in regular use and nothing has changed since the last service. We look at the firebox, damper, flue from the firebox up, and the exterior where we can reach it safely, then tell you plainly what we found and what it means.
Level 2 Inspection
A Level 2 inspection goes further, including a camera view of the flue and inspection of accessible attic, crawlspace, and chase areas. You need this level after a chimney fire, after any change to the appliance or fuel type, or when you’re buying or selling a home. We bring a camera and document what’s inside the flue so you’re not taking anyone’s word for it.
Level 3 Inspection
A Level 3 inspection is the most involved and is used when a Level 1 or Level 2 turns up a problem that can’t be assessed without opening things up. That can mean removing part of a wall, a ceiling, or chimney components to reach a hidden defect. We only recommend this level when the evidence points to a concealed problem, and we explain why before anything is opened.
Camera Inspection
A camera inspection sends a video scope down the flue to show cracks, gaps, missing mortar joints, and creosote glaze that a visual check from the top or bottom can’t reveal. It’s the tool that separates a guess from a diagnosis. We record what we see and share the findings with you so you can see the same thing we did.
Flue Inspection
A flue inspection focuses specifically on the passage your smoke travels through, from the appliance connection to the top of the chimney. Cracks in clay tile, separated liner sections, and blockages from nests or debris all show up here. When a flue needs repair, we can line it with DuraFlex flexible liner systems sized for wood, gas, or oil appliances.
Real Estate Inspection
A real estate inspection is a Level 2 performed to document chimney condition for a transaction or an insurance requirement. It answers what a buyer, seller, or insurer needs to know about the system’s condition. We offer it as a standalone service, so you’re not required to book a cleaning to get the report.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
Chimney systems carry a mix of components, and knowing how each one wears helps us tell you what’s near the end of its life. When we inspect an Olympia Chimney installation, we know where their liners and caps tend to show wear first, so the inspection focuses on the right spots. The same goes for Famco components, which show up in a lot of the fireplace and venting work we look at.
DuraFlex liner systems are common in relined chimneys and in gas and oil appliance venting, and we inspect those with an eye for the connections that matter most. Copperfield caps and related components are another system we see and service regularly, so we can tell you when a cap is doing its job and when it’s letting water in. Whether you have Olympia Chimney, DuraFlex, or any other make, we can help you understand its condition.
Signs You Need Chimney Inspection Right Now
Some signals are worth acting on before your next burn. If you notice any of these, it’s time to have the system looked at.
- Smoke backing into the room. Smoke that won’t draft up the flue usually points to a blockage, a damaged flue, or a pressure problem. None of those fix themselves, and a camera inspection can find the cause.
- A strong creosote smell, especially in warm weather. Creosote that smells strongest when the chimney is warm and damp hints at heavy buildup. A sweep and inspection tells you whether it’s a cleaning issue or something deeper.
- Visible cracks in the firebox or flue tiles. Cracks let heat and gases escape where they shouldn’t. A flue inspection can map the damage and tell you whether a liner repair makes sense.
- Water stains or rust on the firebox or damper. Moisture getting past a failing crown or cap often shows up inside first. Inspecting the exterior and interior together finds the source.
- You’ve had a chimney fire, even a small one. A chimney fire can damage tile and liner joints without obvious exterior signs. A Level 2 inspection after any fire is the right next step.
Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. We ask how you use the fireplace, what fuel you burn, and what you’ve noticed. That context shapes where we look first, whether it’s a wood-burning fireplace or a gas appliance connection.
- 2
We inspect the accessible interior. Firebox, damper, smoke chamber, and the flue from below get a careful visual check. Any loose mortar, cracked tile, or creosote glaze gets noted for the report.
- 3
We go to the roof where it’s safe. The chimney top, crown, cap, and flashing get inspected from above. This is where water intrusion and failing caps usually show, and it’s also dangerous work, which is why we handle it rather than leaving it to you.
- 4
We scope the flue with a camera when the level calls for it. Video inspection shows hairline cracks and joint gaps that a visual check misses. We record what we see so you can review it with us.
- 5
We walk you through findings and options. You get a clear account of what we found, what it means, and whether it needs attention now or can wait. Nothing is recommended without evidence you can see for yourself, and the written estimate sets the final price.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Highland Creek?
A Level 1 inspection in Highland Creek typically runs $95 – $175 depending on the number of flues and how accessible the system is. A Level 2 inspection, which includes the camera view and accessible attic and crawlspace checks, usually runs $175 – $350. A Level 3 inspection is a bigger job and gets priced per the scope once we know what has to be opened, so we give you that number after the assessment rather than guessing.
Several things move the price. The number of flues on the chimney matters, since each one gets inspected. So does access: a steep roof or a chase that’s hard to reach takes more care. Adding a camera scope to a basic check adds cost, but it’s often the cheapest way to avoid paying for a repair you don’t need.
You avoid overpaying by getting an inspection on its own when that’s all you need. We offer inspections as a standalone service, so you’re not required to book a sweep to get answers. A free estimate from us covers what the specific level will include, and the written estimate sets the final price. Call (855) 337-1327 for an exact quote.
Chimney Inspection Near Highland Creek – Our Service Area
We connect homeowners with independent local professionals across the area around Highland Creek, including Derita, NoDa, University City, Plaza Midwood, Elizabeth, Hickory Grove, Wesley Heights, Dilworth, Myers Park, Eastover, and Mountain Island. A chimney inspection in a neighboring area follows the same process and the same level of care. When you call, we book you into the next opening, Sunday through Friday, 7am to 7pm. For a chimney inspection elsewhere in the area, the scope is the same.
Serving Highland Creek, NC – Our Local Coverage Area
We serve Highland Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Highland Creek
A chimney inspection is a structured assessment of your chimney system’s condition, done at one of three levels depending on what’s needed. A Level 1 is a visual check of accessible parts, a Level 2 adds a camera view of the flue and accessible attic and crawlspace areas, and a Level 3 opens up concealed parts when a defect can’t otherwise be reached. The point is to find problems before they cause smoke, water damage, or a fire hazard. Call (855) 337-1327 for an exact quote.
A Level 1 inspection usually takes 30 to 45 minutes. A Level 2 with camera scope and attic and crawlspace checks typically takes an hour or more, depending on the number of flues and access to the roof. Level 3 work takes longer because it involves opening up concealed areas.
A Level 1 inspection typically runs $95 – $175 and a Level 2 runs $175 – $350. Level 3 work is priced per the scope after we assess what has to be opened. The written estimate sets the final price, and estimates are free. Call (855) 337-1327 for an exact quote.
Yes. We inspect and service Olympia Chimney components as well as DuraFlex liner systems and other common makes. We know where those systems tend to wear, so the inspection focuses on the right spots. Whether you have Olympia Chimney or another brand, we can help.
Same-day booking is often possible. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. If you call outside dispatch hours, we’ll book you into the next opening.
Our satisfaction guarantee stands behind the work, and any warranty on materials depends on the specific product being installed, such as a DuraFlex liner or a HeatShield ceramic repair. We explain what’s covered in writing before the work begins, so you know exactly what you’re getting.
Clear the hearth area and any furniture near the fireplace so there’s room to work. Don’t burn a fire for at least 24 hours before the appointment. If you have paperwork from a previous inspection or a record of the last cleaning, have it ready so we can compare findings.
Schedule Your Chimney Inspection Service in Highland Creek Today
If your fireplace has been getting a workout and you want to know what’s actually going on inside the flue, schedule an inspection. Our technicians have up to 13 years of experience, and we’ll show you what we found and what it means before recommending anything. Call (855) 337-1327 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Learn more about Chimney Sweep Highland Creek and the chimney inspection service.
Written by the team at Chimney Sweep Highland Creek.