Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Highland Creek Homeowners
If your fireplace smells like smoke when it shouldn’t, the damper won’t close tight, or the pilot on your gas insert won’t stay lit, the system needs a trained eye. Our technicians have up to 13 years of experience diagnosing exactly these problems in Highland Creek, and we run the whole scope in-house: cleaning, inspection, fireplace repair, cap and crown work, and structural chimney repair. That means nobody hands you off to a separate mason when the firebox needs rebuilding. One provider, one explanation, one plan.
Here’s what matters most: nothing gets recommended until you see the evidence. A camera inspection and photo report are included with the work, so “here’s what we found and here’s what it means” is a literal statement, not a slogan. We work with your insurer when a claim is part of the picture, and every job starts with a flat-price sweep agreed before we book. Same-day fireplace repair is often possible in Highland Creek, but the urgent thing is seasonal: get the system checked before burning season, not the night the first cold snap hits.
Call (855) 337-1327 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Fireplace Repair Service Includes
Fireplace repair covers the components that make a fireplace actually function: the firebox, the damper, the gas valve and pilot assembly, the insert, and the flue it all vents into. We handle each of these as part of one system, because a damper that won’t seal and a firebox crack usually aren’t two separate stories. Below is what each sub-service involves and when it becomes necessary.
Gas Fireplace Repair
Gas fireplaces are convenient until something in the ignition or gas train fails, and then they sit dead in the wall. We diagnose burner problems, weak flames, ignition failures, and thermocouple or thermopile faults that keep the unit from staying lit. Gas work carries real risk, so we test the connections and combustion before calling a job finished, and we tell you plainly when a component needs replacement versus adjustment. If you’re not sure whether the problem is gas or electrical, that diagnosis is part of the visit.

Wood Burning Fireplace Repair
Wood fireplaces take the most abuse of any unit: heat cycling, creosote, moisture, and masonry movement all leave marks over time. We repair firebox cracks, deteriorated mortar joints, damaged dampers, and smoke issues caused by a flue that no longer drafts correctly. When the firebox surface has spalled or the mortar has eroded, we use HeatShield ceramic repair systems to resurface rather than jumping straight to replacement. That’s a professional-grade restoration most sweep-only companies don’t offer, and it keeps a sound firebox in service.

Fireplace Insert Service
Inserts sit inside an existing fireplace and rely on a properly sized liner to vent correctly, so insert problems are often liner problems in disguise. We service gas, wood, and pellet inserts, check that the connection to the flue is sealed, and confirm the liner matches the appliance. If an insert was installed without the right liner, we can reline with a DuraFlex flexible system sized to the unit. Getting this right matters more than the insert brand, because a mismatched vent is where performance goes wrong.

Damper Repair
The damper is the valve between your firebox and the flue, and when it stops sealing, you get smoke in the room or heat loss up the chimney all winter. We repair stuck, rusted, warped, and misaligned dampers, and we replace top-sealing dampers when the original is beyond saving. A damper that closes properly is one of the cheapest efficiency fixes on a fireplace. We check it as part of every inspection so you know its condition before it becomes a problem.
Firebox Repair
The firebox is where the fire lives, so cracks, spalling, and crumbling mortar there are structural warnings, not cosmetic ones. We assess the firebox with a camera and by hand, then repair masonry joints or resurface the interior with HeatShield ceramic material when the box is still sound underneath. If a crack has opened into the surrounding structure, we’ll tell you that too, and explain what a rebuild involves. You get a straight answer on whether it can be repaired or needs to be rebuilt.
Pilot Light Repair
A pilot that won’t stay lit usually points to a dirty orifice, a failing thermocouple, or a draft pulling the flame out. We clean and test the pilot assembly, check gas pressure at the valve, and replace worn safety components so the unit shuts off correctly if the flame goes out. This isn’t a job to troubleshoot by trial and error with gas involved, so we test the whole assembly rather than swapping one part and hoping. If the pilot is fine but the burner still won’t light, we trace the fault to the valve or the control module.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with Olympia Chimney components on venting and cap work, and we know where those systems tend to wear: joints, seals, and the connections that take the most heat. We also service Famco products and understand how their components fail over a season of steady burning, which helps us diagnose quickly instead of guessing. Copperfield equipment comes through our door regularly too, and we’ve learned its quirks well enough to spot a problem on inspection rather than after a failed burn.
For relining and firebox restoration, we use DuraFlex flexible liner systems and HeatShield ceramic repair because they’re the materials professionals actually rely on for this work. Whether you have Olympia Chimney, Famco, Copperfield, or any other make, we can help, and we’ll tell you honestly if a repair is the right call or if replacement makes more sense for your system. A brand match matters less than getting the venting and the firebox right.
Signs You Need Fireplace Repair Right Now
Most fireplace problems announce themselves before they become dangerous. These are the signals that mean it’s time to book a repair visit rather than wait for the next burning season.
- Smoke backing into the room. If smoke rolls out instead of up the flue, the damper, the flue, or the draft is compromised, and each one points to a different fix. This is the symptom homeowners notice first, and it’s worth diagnosing before it gets worse.
- A damper that won’t seal or won’t budge. A damper stuck open wastes heat all winter; one stuck closed keeps you from using the fireplace at all. Either way, it’s a repair we can usually handle on the first visit.
- Cracks or crumbling mortar in the firebox. Small cracks widen with every fire, and mortar that’s crumbling lets heat reach places it shouldn’t. Have it looked at before the next burn rather than after.
- A gas pilot that keeps going out. A pilot that won’t stay lit is often a safety component failing, and gas systems deserve a trained diagnosis. Don’t relight it repeatedly and assume it’s fine.
- Strong creosote smell or visible glaze in the flue. Heavy creosote buildup raises chimney fire risk, and a repair visit that includes a sweep is the right response. We inspect the flue with a camera so you can see the condition yourself.
Our Fireplace Repair Process – Step by Step
- 1
Book and confirm the scope. You call, we ask what’s happening with the fireplace, and we set a flat-price sweep before the visit is booked. No surprise charges, and you know what you’re paying before we arrive.
- 2
Inspect with a camera. We run a camera through the flue and check the firebox, damper, and components by hand, then document what we find with photos. This is where a repair gets separated from a guess.
- 3
Explain what we found and what it means. You get the photo report and a plain explanation of each issue, including which ones need attention now and which can safely wait. We’ll tell you when a repair isn’t urgent.
- 4
Agree on the repair and the price. We lay out the recommended fix, the materials involved, and the estimated price in writing. You decide, and nothing gets done without your sign-off.
- 5
Complete the repair and verify it. We do the work with the right material for the job, then test the system, check for gas leaks on gas units, and confirm the fireplace functions as it should before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Highland Creek?
A typical damper repair in Highland Creek runs $150 to $400 depending on whether the damper can be repaired or needs replacement. A firebox resurfacing with HeatShield ceramic material usually lands between $600 and $1,500, and gas pilot or valve repairs generally fall in the $200 to $500 range. An insert reline with a DuraFlex system is a larger job, typically $1,800 to $4,000 depending on the appliance and liner length. These are estimated ranges, and the written estimate sets your final price.
What moves the price: the condition of the firebox, whether the flue needs cleaning first, the type of liner required, and whether a component can be repaired or has to be replaced. The best way to avoid overpaying is to get the diagnosis with photos before approving anything. Our estimate is free, and it’s itemized so you can see what each part of the job costs. If work can wait, we’ll say so, because a rushed repair costs more than a planned one.
Fireplace Repair Near Highland Creek – Our Service Area
We serve Highland Creek and the surrounding neighborhoods, including Derita, NoDa, University City, Plaza Midwood, Elizabeth, Hickory Grove, Wesley Heights, Dilworth, Myers Park, Eastover, and Mountain Island. If you’re closer to Derita, our team handles fireplace repair there too, and NoDa homeowners can reach the same service at fireplace repair. Response times vary by neighborhood, and booking early in the season keeps the schedule open.
Serving Highland Creek, NC – Our Local Coverage Area
We serve Highland Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Highland Creek
Fireplace repair is the work of fixing the components that let a fireplace burn and vent safely, including the firebox, damper, gas valve and pilot, insert, and flue connection. It’s different from a routine cleaning, though a repair visit usually includes an inspection and often a sweep. We diagnose the problem with a camera, show you what we found, and fix the cause rather than just the symptom. Call (855) 337-1327 for an exact quote, and estimates are free.
Most repairs take a few hours to a day, depending on the job: a damper fix or pilot repair can be done on a single visit, while firebox resurfacing or relining may take longer. The timeline depends on the condition of the system and whether parts need to be ordered. We give you a realistic window when we book. Call (855) 337-1327 to schedule and get a clearer estimate.
Repairs usually range from about $150 for a simple damper fix up to $4,000 for a full insert reline, with most common jobs in the $200 to $1,500 range. The final price depends on what’s actually wrong and what material the job requires. We provide a written estimate before any work starts, so there are no surprises. Call (855) 337-1327 for an exact quote; estimates are free.
Yes, we service Olympia Chimney, Famco, Copperfield, and other common fireplace and venting brands. We’re not a dealer claiming factory parts, but we know where these systems wear and how to diagnose them honestly. The right repair depends on the component, not the label. Call (855) 337-1327 to book a visit.
Same-day fireplace repair is often possible in Highland Creek, though it depends on the schedule and the scope of the job. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 337-1327 to check availability.
Yes, we stand behind our repairs with a satisfaction guarantee and back the materials we install as the manufacturer specifies. If something we fixed doesn’t perform as it should, we’ll make it right. We walk you through the warranty terms before the job is done, so expectations are clear. Call (855) 337-1327 to talk through your repair.
Clear the area around the hearth, remove any grate or log set that blocks access, and note any symptoms you’ve noticed, like smoke, smells, or a pilot that won’t stay lit. If you have the manual for a gas unit, have it handy. We handle the inspection and the work; all we need is access and a little room to move. Call (855) 337-1327 to set a time.
Schedule Your Fireplace Repair Service in Highland Creek Today
Don’t wait for the first cold night to find out your fireplace won’t light or your damper won’t seal. Book a fireplace repair visit with Chimney Sweep Highland Creek and get a camera inspection, a photo report, and a written estimate before anything is approved. Call (855) 337-1327. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your no-obligation estimate is free, and the written price sets the final cost. If your chimney needs a cleaning alongside the repair, our chimney sweep service handles it in the same visit, and we can also inspect the chimney to confirm the flue is sound.
Written by the team at Chimney Sweep Highland Creek.